To Next Page

To Previous Page

SKR MINI MZ V1.0 User Guide Shenzhen BIGTREE Technology co., LTD.

3 / 9

13）Adopt DC5.0 socket power input

12）Reserve BLTouch, PH2.0 normally open fan, hot bed output,

switch power input, resume printing while power

off ,filament break detection , and automatic shutdown

after printing port；

13）Support offline printing and online printing；

14）Reserved double Z-axis port

15）Support onboard SD card printing function

16）Onboard EEPROM: AT24C32

17）Support RGB light bar

2.Motherboard Parameters:

1）Appearance size: 100.7mm*70.8mm

2）Installation size： 59.7*51mm

3）Microprocessor： ARM 32-bit Cortex™-M3 CPU

4）Power Voltage：DC12V--DC24V

5）Motor Driver：Integration of TMC2209 UART mode

6）Motor drive interface：X、Y、Z0、Z1、E

7）Temperature sensor interface：BED、T0

9）Display：2.4 inch TFT/LCD, 3.5 inch TFT /LCD(Note: MEGA Zero

original screen is not supported)

10）PC communication interface：MINI USB（USB 2.0）, easy to

plug and unplug, communication baud rate 115200

11）Expand the interface function support: Resume Printing

While Power Off,Filament Break Detection, Automatic Shutdown

After Printing, Automatic leveling BL Touch,ect.

12）Support file format: G-code

13）Supported machine architecture： MEGA Zero

14）Recommended software： Cura、 Simplify3D、 pronterface、

Repetier-host、Makerware

BIGTREETECH SKR MINI MZ V1.0 User Manual

Questions and Answers: