Page 12
SET UP & USE
BLADE INSTALLATION
5. A. Remove the 3 screws and lock washers
on the top housing cover of the fan motor
assembly. Lift o the housing cover.
B. Insert the blade into the slots in the
housing. Secure each blade to the blade
bracket with the provided 3 screws and 3
washers. Secure each blade to the blade
bracket with the provided 3 screws and 3
washers.
C. Once all the blades are installed,
reattach the top housing cover using
the previously removed screws and
lock washers.
Blade Screws
with Washers
Slot
Blade
Blade Screws
with Washers
Slot
Blade
To Next Page
Loading...
Need help?
General
