BLUM TANDEM plus BLUMOTION 563F User Manual

Dimensions in millimeters (inch equivalents as noted)
Subject to technical modifications without notice. © 2013, Blum Inc.
LIT.TDM563F.PI2.08013
TANDEM plus BLUMOTION 563F
TANDEM template
562 runners 562 and 563 runners ■ Color changes from orange to gray
■ Hole locations change to accommodate
n
ew and old locking devices
Part no. Part no.
OLD TANDEM template
T65.1000.02
NEW TANDEM template
T65.1600.01
Drawer preparation
562F runners New 563F runners ■ No change to rear hook hole location,
d
epth or diameter
■ Rear notch width changes from
33 (
1-5/16") to 35 (1-3/8")
■ Mounting screws change from #7 head
t
o #6 head wood or system screws
screws
606N or 606P
or
662.1150.HG
screws
707N
or
661.1300.HG
7 (9/32")
11 (7/16")
Ø6 x 10
bore for hook
35 (1-3/8") minimum rear notch
13 (1/2")
24.5 (31/32")
7 (9/32")
11 (7/16")
Ø6 x 10
bore for hook
33 (1-5/16") minimum rear notch
13 (1/2")
24.5 (31/32")
Locking devices
562 runners New 563 runners ■ 9 (
11/32") difference in mounting hole
location
■ Mounting screws change from #6 truss
h
ead screws to #6 flat head wood
screws
NOTE: T51.17xx locking devices cannot be
used wit
h new 563 runners. T51.18xx and
T51.19xx locking devices cannot be used
with 562 runners.
Part no.
Part no.
Without side adjustment
T51.18xx
Locking devices
T51.17xx
With side adjustment
T51.19xx
24
23
24
32
screws
612TH
screws
606N or 606P

BLUM TANDEM plus BLUMOTION 563F Specifications

General

Brand	BLUM
Model	TANDEM plus BLUMOTION 563F
Category	Indoor Furnishing
Language	English