69
EN
2 operating days: Select „Work timer a“ > „work day“ and use the arrow keys
to set the day on which the lawnmower is to be operated. Then use the
arrow keys to select „s*“ and press „Yes“ to set the starting point.
Starting point number Operating day
• Select a starting point from 1 - 3.
• „0“ means that no starting point has been set.
3 Select Work Timer > Mower Startpoints > Set Startpoint. Press the Yes
button to enter this menu. Then specify the length and angle for the start
point. Use the arrow keys to select Start point 1, 2 or 3 and press OK to set
the length and angle of the start point. After entering the values, press the
OK button again to conrm your setting.
Setting the starting point Starting point 1
• An angle between 0° and 180° can be selected.
• A length of 0 - 999 m can be selected.
• When the lawnmower is in the charging station for charging, the
operation timer must be activated.
To Next Page
Loading...
Need help?
General
