BMW C 400 X User Manual

Installing the front wheel
WARNING
Use of a wheel which does
not comply with series speci-
fications
Malfunctions during control inter-
ventions by ABS and ASC
Please see the information on
the effect of wheel sizes on the
ABS and ASC chassis control
systems at the beginning of
this chapter.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque
Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
If applicable, insert the spacer
bushing 5 on the left side in
the wheel hub.
ATTENTION
Front wheel installation op-
posite the running direction
Accident hazard
Observe running direction ar-
rows on tire or rim.
Roll front wheel into front
suspension.
Raise the front wheel and in-
stall the quick-release axle 4.
Mount the screw 1 with the
appropriate torque. Brace
quick-release axle on the right
side at the same time.
10
148
z Maintenance
https://www.motorcycle-manual.com/

BMW C 400 X Specifications

General

Displacement	350 cc
Transmission	CVT
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Front Brake	Single disc, 265 mm
Rear Brake	Single disc, 265 mm
ABS	Standard
Front Tire	120/70 R15
Rear Tire	150/70 R14
Seat Height	775 mm
Fuel Capacity	12.8 liters
Width	835 mm
Engine Type	Single-cylinder, four-stroke
Max Power	34 hp (25 kW) @ 7, 500 rpm
Max Torque	35 Nm
Rear Suspension	Double swingarm
Weight	204 kg
Length	2, 210 mm
Height	1, 305 mm
Wheelbase	1, 565 mm