66
SMG display in instrument cluster
The selector lever position, currently
engaged gear and selected driving pro-
gram are displayed in the instrument
cluster.
1 Engaged gear
2 Selected driving program, corre-
sponds to the number of illuminated
fields, refer to page 68
3 Tapping the selector lever to the right
switches over into the displayed shift
mode
4 "A" indicates an activated automated
shift mode
R – Reverse position
Only engage with the vehicle stopped
or at low speed, e.g. for rocking free in
deep snow.
An intermittent signal tone indi-
cates that the reverse position has
been engaged.<
0 – Position 0 (Neutral)
Always engage before starting the
engine.
If the driving situation requires, e.g.
when downshifting on slippery roads,
the SMG II automatically disengages
and reengages the clutch, i.e. it is not
necessary to manually engage
position 0.
S – Sequential mode
In the sequential mode all forward
gears are to be shifted by the driver.
Changeover from automated to
sequential mode:
> Tap the selector lever to the right
toward "S" or
> change gears with the selector lever
or the shift paddles on the steering
wheel.
You do not need to reduce the throttle
for shifting.
Sequential M gearbox SMG II*
handbook.book Page 66 Saturday, July 27, 2002 1:12 PM
To Next Page
Loading...
Need help?
General
