Switching off
Press and hold the button, until the
LEDs go out.
Seat climate control
Concept
The seat climate control combines the functions
of the seat heating and active seat ventilation.
General information
The seat heating and active seat ventilation are
operated with a common button on the climate
control panel.
When both systems are active, a push of the but‐
ton reduces the intensity of both functions by
one level each.
The last active function or function that is config‐
ured with higher intensity will be activated di‐
rectly when the system is switched on again.
When both functions with the same intensity
configuration are deactivated, the system will au‐
tomatically activate the seat heating.
Overview
Seat climate control
Switching on
1. Press the button.
2. Select the desired setting via the touch‐
screen.
One red and one blue LED each will illumi‐
nate.
Switching off
Press and hold the button, until the
LEDs go out.
Climate control rules
Concept
Depending on the equipment, some heating and
cooling functions can be automatically activated
depending on the external temperature.
General information
The external temperature at which the functions
are to be automatically activated can be set via
iDrive.
Activation is performed if the external tempera‐
ture exceeds or falls below the set temperature
in the first few minutes after drive-ready state
has been switched on. A new alignment is car‐
ried out after the settings have been changed.
Depending on the equipment package, the fol‐
lowing functions can be automatically activated:
▷ Seat heating.
▷ Heated steering wheel.
▷ Seat ventilation.
If the trip is continued within approx. 15 minutes
after a stop, the functions are activated automati‐
cally with the levels that were last selected.
Functional requirement
▷ The safety belt of the driver's seat is buckled.
▷ Drive-ready state is switched on.
Seite 122
CONTROLS
Seats, mirrors and steering wheel
122
Online Edition for Part no. 01405A1E4B0 - X/20
To Next Page
Loading...
Need help?
General
