The LED is illuminated when recirculated-air
mode is switched on. The supply of outside air is
shut off.
When recirculated-air mode is switched off, fresh
air is directed into the vehicle's interior.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Air quality"
5. Select the desired setting:
▷ "Air recirculation"
▷ "Fresh air"
To prevent window fogging, recirculated-air
mode switches off automatically after a certain
amount of time, depending on the environmental
conditions.
With constant recirculated-air mode, the air qual‐
ity in the car's interior deteriorates and window
fogging increases.
If there is window condensation, switch off recir‐
culated-air mode or defog the windows.
Air flow, manual
Concept
The air flow for climate control can be adjusted
manually.
General information
To adjust the air flow manually switch off AUTO
program first.
Adjusting
Press the lower or upper side of the
button: decrease or increase air flow.
The selected air flow is shown on the climate
control display.
The air flow may be reduced automatically to
save battery power.
Manual air distribution
Concept
The air distribution for climate control can be ad‐
justed manually.
Adjusting
Press the button repeatedly to select a
program:
▷ Windows, upper body region, and floor area.
▷ Upper body region and floor area.
▷ Floor area.
▷ Windows and floor area.
▷ Windows.
▷ Windows and upper body.
▷ Upper body region.
The selected air distribution is shown on the cli‐
mate control display.
SYNC program
Concept
The following settings of the driver's side can be
transferred to the front-passenger side:
▷ Temperature.
▷ Air flow.
▷ Air distribution.
▷ AUTO program.
Switching on/off
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Synchronize"
The program is switched off automatically if the
settings on the front passenger side are
changed.
Seite 276
CONTROLS
Climate control
276
Online Edition for Part no. 01405A1E4B0 - X/20
To Next Page
Loading...
Need help?
General
