Parking lights, low beams
and roadside parking lights
General information
Position of switch: , ,
If the driver's door is opened when the drive-
ready state is switched off, the exterior lighting is
automatically switched off after a period of time.
Parking lights
Switching on
Position of switch:
The indicator light in the instrument clus‐
ter lights up.
The vehicle is illuminated on all sides.
Do not use the parking lights for extended peri‐
ods; otherwise, they might drain the battery and
it would then be impossible to switch on drive-
ready state.
Low beams
Switching on
Position of switch:
The low beams illuminate when drive-ready state
is switched on.
The indicator light in the instrument clus‐
ter lights up.
Roadside parking lights
When the vehicle is parked, a one-sided roadside
parking light can be switched on.
Button Function
Right roadside parking light on/off.
Left roadside parking light on/off.
Welcome lights
Principle
The exterior lighting is switched on automatically
when approaching or unlocking the vehicle.
General information
Depending on the equipment, the exterior light‐
ing of the vehicle can be set individually.
Activating/deactivating welcome
light
1.
"CAR"
2. "Settings"
3. "Exterior lighting"
4. Depending on the equipment, select the fol‐
lowing setting:
▷ "Welcome and goodbye"
When unlocking the vehicle, individual
light functions are switched on for a lim‐
ited time.
▷ "Door handle lights"
Door handles and the ground in front of
the doors are illuminated for a limited
time.
▷ "Welcome Light Carpet"
The area next to the vehicle is illuminated
for a limited time.
LED light carpet
The light source is located in the position indi‐
cated.
Seite 172
CONTROLS
Lights
172
Online Edition for Part no. 01405A37CC6 - VI/21
To Next Page
Loading...
Need help?
General
