Bogen CSD2X2 Specifications

Frequency Response . . . . . . . . . . 95 Hz - 20 kHz
SPL @ 1W / 1m . . . . . . . . . . . . . . . 94 dB
Power Taps . . . . . . . . . . . . . . . . . . 4, 2, 1, 0.5, 0.25 watts
Dispersion @ 2 kHz
(6 dB down) . . . . . . . . . . . . . . . . . .100°
Cone Material & Surround . . . . . . Treated paper
Cones . . . . . . . . . . . . . . . . . . . . . . .
8" main cone with secondary
high frequency cone
Magnet Weight . . . . . . . . . . . . . . . .10 oz.
Connection . . . . . . . . . . . . . . . . . . . Via wire nuts (included in electrical box)
Dimensions . . . . . . . . . . . . . . . . . .23-13/16" W x 5" H x 23 -13/16" D
Product Weight . . . . . . . . . . . . . . .12 lb.
70V and 25V Compatible.
Plenum-Rated, complies with Requirements of Standard UL-2043.
The speaker shall be a Bogen Model CSD2X2 or CSD2X2VR Drop-In
Ceiling Speaker, which shall be fully enclosed and constructed of
industrial grade steel. It shall be comprised of a damped high-
compliance factory-mounted 8" loudspeaker that shall consist of an
8" treated paper main cone, a secondary high frequency cone, and
a 10 ounce magnet. The unit shall have a 70V/25V transformer with
power taps of 4, 2, 1, 0.5, and 0.25 watts, selectable by rotary
switch. Output shall be 94 dB @ 1 watt / 1 meter (min.). Frequency
response shall be 95 Hz - 20 kHz (min.). The speaker shall have a
non-reflective, off-white or bright white (''U'' versions) metal finish grille.
For CSD2X2VR: A front-mounted volume control shall be easily accessible.
The speaker assembly will fit into 2' x 2' and 2' x 4' ceiling tiles.
For 2' x 2' installations, a support rail shall not be needed and no
cuts to the ceiling shall be necessary. For 2' x 4' installations, a single
cut to the ceiling tile and an included support rail shall be needed.
The speaker shall measure 23-13/16" W x 5" H x 23-13/16" D and
weigh 12 lb.
SPECIFICATIONS
Architect and Engineer Specifications
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: 201-934-8500 Fax: 201-934-9832 www.bogen.com
Specifications subject to change without notice.
© 2004 Bogen Communications, Inc.
Part No. 54-9266-01C 0805
Lead Color
70V Red
25V Yellow
COM Black
SUPPORT RAIL
CROSSBAR INCLUDED
(FOR USE WITHIN 2' X 4' TILE SPACE ONLY)
SEISMIC
TETHER
POINT
SEISMIC
TETHER
POINT
COVER
COVER
WIRE
NUTS
WIRE
NUTS
FINELY PERFORATED
METAL FINISH GRILLE
FRONT-MOUNTED
VOLUME CONTROL (''VR'' VERSION)
Drop-In Ceiling Speaker CSD2X2 & Variations
CSD2X2
CSD2X2U
CSD2X2VR
CSD2X2VRU
Model
Off-white Finish Bright White Finish (U) Back Can Recessed Volume Control (VR)
●
●
●
●
●
●
●
●
●
●

Bogen CSD2X2 Specifications

General

Tweeter	-
Number of drivers	1
Speaker placement	Wall-mountable
Audio output channels	1.0 channels
Subwoofer driver diameter (imperial)	8 \
Frequency range	96 - 20000 Hz
RMS rated power	4 W
Signal-to-Noise Ratio (SNR)	94 dB
Connectivity technology	Wired
Product color	White
Power source type	AC

Weight and Dimensions

Width	406 mm
Height	127 mm
Weight	5443 g