EasyManuals Logo
Home>Bogen>Speakers>CSD2X2

Bogen CSD2X2 Technical Specifications

Bogen CSD2X2
2 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Frequency Response . . . . . . . . . . 95 Hz to 20 kHz
SPL @ 1W / 1m . . . . . . . . . . . . . . . 94 dB
Power Taps . . . . . . . . . . . . . . . . . . 4, 2, 1, 0.5, 0.25 watts
Dispersion @ 2 kHz
(6 dB down) . . . . . . . . . . . . . . . . . .100°
Cone Material & Surround . . . . . . Treated paper
Cones . . . . . . . . . . . . . . . . . . . . . . .
8" main cone with secondary
high frequency cone
Magnet Weight . . . . . . . . . . . . . . . .10 oz.
Connection . . . . . . . . . . . . . . . . . . . Via wire nuts (included in electrical box)
Dimensions . . . . . . . . . . . . . . . . . .24" W x 4-7/8" H x 24" D
Product Weight . . . . . . . . . . . . . . .12 lb.
70V and 25V Compatible.
Plenum-Rated and Listed to UL Standard 1480 for U.S. use.
The speaker shall be a Bogen Model CSD2X2 or CSD2X2VR Drop-In
Ceiling Speaker, which shall be fully enclosed and constructed of
industrial grade steel. It shall be comprised of a damped high-
compliance factory-mounted 8" loudspeaker that shall consist of an
8" treated paper main cone, a secondary high frequency cone, and
a 10 ounce magnet. The unit shall have a 70V/25V transformer with
power taps of 4, 2, 1, 0.5, and 0.25 watts, selectable by rotary
switch. Output shall be 94 dB @ 1 watt / 1 meter (min.). Frequency
response shall be 95 Hz to 20 kHz (min.). The speaker shall include
4 seismic attachment points. The speaker shall have a non-reflec-
tive, off-white or bright white (''U'' versions) metal finish grille. Speaker
is listed to UL Standard 1480 for U.S. use.
For CSD2X2VR: A front-mounted volume control shall be easily accessible.
The speaker assembly will fit into 2' x 2' and 2' x 4' ceiling tiles.
For 2' x 2' installations, a support rail shall not be needed and no
cuts to the ceiling shall be necessary. For 2' x 4' installations,
a single cut to the ceiling tile and an included support rail shall be
needed. The speaker shall measure 24" W x 4-7/8" H x 24" D and
shall weigh 12 lb.
SPECIFICATIONS
Architect and Engineer Specifications
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: 201-934-8500 • Fax: 201-934-9832
www.bogen.com
Specifications subject to change without notice.
© 2004 Bogen Communications, Inc.
54-9266-01E 1208
Lead Color
70V Red
25V Yellow
COM Black
SUPPORT RAIL
CROSSBAR INCLUDED
(FOR USE WITHIN 2' X 4' TILE SPACE ONLY)
COVER
COVER
WIRE
NUTS
WIRE
NUTS
SEISMIC
ATTACHMENT
POINTS (4X)
FINELY PERFORATED
METAL FINISH GRILLE
FRONT-MOUNTED
VOLUME CONTROL
(''VR'' VERSION)
Drop-In Ceiling Speaker CSD2X2 & Variations
CSD2X2
CSD2X2U
CSD2X2VR
CSD2X2VRU
Model
Off-white Finish
Bright White Finish (U)
Back Can
Recessed Volume
Control (VR)

Other manuals for Bogen CSD2X2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bogen CSD2X2 and is the answer not in the manual?

Bogen CSD2X2 Specifications

General IconGeneral
Tweeter-
Number of drivers1
Speaker placementWall-mountable
Audio output channels1.0 channels
Subwoofer driver diameter (imperial)8 \
Frequency range96 - 20000 Hz
RMS rated power4 W
Signal-to-Noise Ratio (SNR)94 dB
Connectivity technologyWired
Product colorWhite
Power source typeAC
Weight and Dimensions IconWeight and Dimensions
Width406 mm
Height127 mm
Weight5443 g

Related product manuals