• Self-aligning, field-replaceable diaphragm
• High-intelligibility and efficiency
• Screw terminals for easy audio line connection
• Plastic cover protects connectors and tap selector
switch, also provides strain relief for the audio line
• Optional terminal and tap selector fitting (Model
TCSPT1) allows placement of rigid or flex conduit
to wrap to back of horn
• Banding slots on mounting bracket permit mount-
ing on beams or pillars, or with a beam clamp
(BC1, sold separately)
• Textured mocha enamel finish on aluminum, match-
ing polycarbonate horn flare
• Lifetime limited warranty
The Bogen KFLDS30T is a wide dispersion, high-intelli-
gibility, reentrant-type horn loudspeaker designed for
applications where wide angle projection and directivi-
ty is a necessity.
The flare-shaped horn can be rotated to project wider
dispersion in either the horizontal or vertical plane. The
speaker’s all-purpose tilt-and-swivel base simplifies
installation and positioning.
Its sturdy, weatherproof, polycarbonate and aluminum
construction is ideal for both indoor and outdoor use.
Screw terminals make installation fast and easy. A plas-
tic cover protects the connectors and 70V/25V tap
selector switch, as well as provides strain relief for the
audio line.
• 30 Watts max. @ 70 volts or 15 Watts max.
@ 25 volts
• Weatherproof polycarbonate and aluminum
construction
• Driver enclosed in waterproof housing
• 70° × 95° dispersion with rotatable horn flare
• All-purpose mounting bracket provides precise
positioning in the vertical and horizontal planes
with a single adjustment
• Seven-position, weather-sealed tap selector switch
• Rotary switch-selected power taps
• Tap settings for 70V: 30, 15, 7.5, 3.7, 1.8;
for 25V: 15, 7.5, 3.7, 1.8, 0.9, 0.5, 0.25
Features
Description
Wide Dispersion
Reentrant Horn
Loudspeaker
Model KFLDS30T
Specifications subject to change without notice.
© 2005 Bogen Communications, Inc.
Part No. 54-8023-27B 0802
To Next Page
Need help?
General
