Divar | Operation Manual | Using the menu EN | 19
Bosch Security Systems
English
TIME/DATE >
• Select a time zone from the list.
• Fill in the actual time and date.
• Select either a 12-hour or a 24-hour clock format.
• Select from three date formats which show either the month (MM), the
day (DD) or the year (YYYY) first.
•Set Daylight Saving to Yes to enable it. Fill in the day, month and time of
both change-overs and the offset if it differs from the information
associated with your time zone.
>> SYNCHRONIZE
•Use the Synchronize function to set the time of the unit from the time of
the network. (Synchronize only works if the Divar time is within 7½
minutes of the server time.) Fill in the IP address of the network time
server.
• The time and date of all other connected units are automatically
synchronized every hour from the time and date of the unit with DVR
ID 1.
MAIN MENU
TIME/DATE
TIME ZONE GMT +01:00 WEST-EUROPE
TIME FORMAT 24 HOUR
TIME 14:00:17
DATE FORMAT YYYY-MM-DD
DATE 2002-06-19
SYNCHRONIZE >
DAYLIGHT SAVING YES
START DATE/TIME LAST SUN MAR 02:00
END DATE/TIME LAST SUN SEP 03:00
OFFSET 01:00
To Next Page
Loading...
Need help?
General