MY23P0a -52_1.0_11.10.2022
206
Cleaning, maintenance and inspection
7.1.9 Checking the suspension seat post
Deflect and let the suspension seat post
rebound.
If you hear unusual noises when the
suspension seat post deflects and rebounds,
or it yields without any resistance, take pedelec
out of service. Contact specialist dealer.
7.1.10 Checking the bell
1 Press the bell button downwards.
2 Let button spring back.
If you do not hear a clear, distinct ring of the
bell, replace bell. Contact specialist dealer.
7.1.11 Checking the handles
Check the handles are firmly in place.
Screw loose handles firmly into place.
7.1.12 Checking the USB cover
If featured, check the position of the cover on
the USB port on a regular basis and adjust if
necessary.
7.1.13 Checking the riding light
1 Switch light on.
2 Check that the headlight and rear light come
on.
If the headlight and rear lights do not come on,
take pedelec out of service. Contact specialist
dealer.
7.1.14 Checking the brake
1 Pull both handbrakes when stationary.
2 Push the pedals.
If no resistance is generated in the
handbrake’s usual position, take pedelec out of
service. Contact specialist dealer.
If the brake is losing fluid, take pedelec out of
service. Contact specialist dealer.
To Next Page
Loading...
Need help?
General
