To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GSB 13 and is the answer not in the manual?
General| No-load speed | 0 - 2800 rpm |
|---|---|
| Drilling diameter in concrete | 13 mm |
| Impact rate | 0 - 44800 bpm |
| Power source | Corded |
| Chuck capacity | 13 mm |
Read all warnings, instructions, and specifications to prevent electric shock, fire, or serious injury.
Keep work area clean, avoid explosive atmospheres, and ensure electrical safety.
Stay alert, use common sense, wear protective equipment, and avoid distractions.
Includes warnings for impact drilling, noise, long drill bits, and tool jamming.
The power tool is intended for impact driving in brick, concrete, stone, and drilling in wood, metal, plastic.
Lists and describes the numbered parts of the power tool shown in the graphics.
Provides technical specifications for different impact drill models.
Details measured noise and vibration emission values according to EN standards.
Instructions for attaching and using the auxiliary handle for safe operation.
Procedures for changing keyless chuck, keyed chuck, and screwdriving tools.
Step-by-step guide for removing and fitting the drill chuck.
Pre-operation checks, setting rotational direction, and operating modes.
Adjusting and preselecting speed/impact rate using the trigger and thumbwheel.
Tips and recommendations for effective and safe power tool usage.
Guidelines for keeping the power tool clean and ensuring efficient operation.
