Your BOSEbuild speaker cube can remember up to eight paired devices and can be actively
connected to two devices at a time. If you pair a ninth device, the least recently used device will
be deleted from the speaker’s memory.
Managing multiple connections
When powered on, the speaker will automatically try to connect to the two most recently
connected devices.
When two devices are actively connected, you can play music from either device. To switch
between connected devices, pause the first device and play music from the second.
Clearing the speaker memory
To clear the speaker’s memory of all paired devices:
1. Press and hold the Bluetooth button ( ) for ten seconds, until you hear “Bluetooth device
list cleared.”
2. Delete the BOSEbuild Speaker Cube from your mobile device’s Bluetooth list.
All Bluetooth devices are cleared and the speaker is ready to pair.
Using your speaker cube with multiple devices
Pairing another device
1. With the speaker cube powered on, press and hold the Bluetooth button ( )until the
Bluetooth indicator light blinks blue and the voice prompt says, “Ready to pair another
device.”
2. On your mobile device, make sure Bluetooth is on. (e Bluetooth menu is usually found in
the Settings menu.)
3. Select your BOSEbuild Speaker Cube from your mobile device’s Bluetooth list.
e Bluetooth indicator glows solid white, and the voice prompt says, “Connected to
<device name>.”
Scrolling through other paired devices
To play music from a paired device that is not currently connected:
1. Press the Bluetooth button ( ) to hear which device(s) are currently connected.
2. Press the Bluetooth button again within three seconds to connect to the next paired device.
3. Repeat step 2 until you hear the correct device name.
Note: To use this feature, voice prompts must be on.
To Next Page
Loading...
Need help?
General