Design Worksheet
Use the following worksheet to create a design using the FreeSpace 360P Series II loudspeakers.
step 1 Using the graph paper on the last page, create a sketch or drawing of the room.
step 2 Confirm that the FreeSpace 360P Series II loudspeaker will meet your loudness requirement.
A. On the chart below, locate the loudspeaker mounting height for this design.
B. Draw a line down to the desired maximum SPL.
C. Draw a horizontal line across the chart at your desired SPL level.
D. All of the loudspeakers listed below the line will meet your loudness requirement.
pro.Bose.com
OF 4
2
FreeSpace
®
360P Series II
DESIGN GUIDE
note: If the loudspeaker that meets your
response and loudness requirement does
not meet your mounting needs, select one
that provides more bandwidth, and also
meets your mounting needs.
Vocal Range Full Range Extended Range
DS 16S & SE 203 FreeSpace 3
DS 16F 360P-II
Model 32 DS 100SE Any vocal range loud-
speaker combined with
a FreeSpace 3 bass
module.
Model 32SE DS 100F
102F
step 3 Confirm that the FreeSpace 360P Series II loudspeaker will meet your Response Requirement.
m 2.4 3.0 3.6 4.2 4.8 5.5 6.1 6.7 7.3 8.0 10.0
ft 8 10 12 14 16 18 20 22 24 26 32
DS 16S / SE 90 89 89 88 87 86 85
360P-II 94 93 92 90 89 88 87
FreeSpace 3 96 95 95 94 93
Model 32SE 96 96 95 94 93 92 91 90
DS 100SE 98 97 97 96 95 94 93 92 92 91 89
FreeSpace 203 98 97 97 96 95
DS 16F 99 97 94 91 90 88 87
102F 105 100 98 95 94 92 91 90 89 88
DS 100F 107 103 102 99 98 96 95 94 93 92 89
Model 32 107 103 100 97 96 94 93 92 91 90
dB
SPL
Loudspeaker
Mounting
Height
Maximum Continuous Output Level
L O U D S P E A K E R
To Next Page
Loading...
Need help?
General
Weight and Dimensions
