TECHNICAL DATA SHEET
pro.Bose.com
OF 8
2
Descriptive Data (continued)
Inputs, Controls and Indicators
Power Indicator Blue LED = ON
Red = FAULT
Power Switch Switch system power on and off
AC Mains IEC Connector
Analog Signal/Clip LED Green = Signal Present
Yellow = -3 dB below clip
Red = Clip (limiter active)
Trim +14 dB @ max
Input ¼" – TS Unbalanced or TRS Balanced
Channel Gain -50 dB to +24 dB (Line)
Max Input Signal (Analog input) +24 dBu, (Balanced)
Input Impedance 10 kΩ +/-10% (Unbalanced)
Bass Module Out (for B1 bass module only) NL4 connector (all pins wired, two for audio, two for auto sensing)
Bass output signal for driving one or two B1 bass modules.
(1 B1 bass module = 8 Ω) (2 B1 bass modules = 4 Ω)
Bass Line Output Post-DSP bass signal output.
Accepts a ¼" TRS cable.
Supplies low-frequency signal for connecting a PackLite
®
power
amplifier or powered sub woofer.
ToneMatch
®
Port CAT5 Ethernet cable with RJ45 connection providing digital audio and
power connection for the optional T1 ToneMatch audio engine.
Physical Properties
Grille Powder-coated steel
Net Weight and Dimensions
L1
®
Model II Power Stand 23.7 lbs. (10.7 kg)
5" H x 10" W x 27" D (128 mm x 262 mm x 692 mm)
L1 Model II Cylindrical Radiator
®
Loudspeakers L1 Model II Cylindrical Radiator
®
loudspeaker top
16.3 lbs. (7.4 kg)
43.5" H x 3.7" W x 4" D (1105 mm x 89 mm x 105 mm)
L1 Model II Cylindrical Radiator
®
loudspeaker bottom
17.4 lbs. (7.9 kg)
43.5" H x 3.7" W x 4" D (1105 mm x 89 mm x 105 mm)
B1 Bass Module 26.6 lbs. (12.1 kg)
14.5" H x 10.25" W x 17.75" D (381 mm x 260 mm x 450 mm)
Shipping Weight
L1 Model II Power Stand 32 lbs. (14.5 kg)
L1 Model II Cylindrical Radiator
®
Loudspeakers 41 lbs. (18.6 kg)
B1 Bass Module 30 lbs. (13.6 kg)
Voltages
USA/Canada 100-120 V 50 / 60 Hz 500 W
Europe 220-240 V 50 / 60 Hz 500 W
L1
®
Model II
portable line array system
To Next Page
Loading...
Need help?
General
Weight and Dimensions
