9
Long hair trimmer
To trim sideburns, moustache or beard, slide the long hair trimmer (2)
upwards.
Tips for the perfect shave
For best results, Braun recommends you follow 3 simple steps:
1. Always shave before washing your face.
2. At all times, hold the shaver at right angles (90°) to your skin.
3. Stretch your skin and shave against the direction of your beard growth.
Cleaning
The hand-held unit should be detached from the power supply cord before
cleaning. The shaver should not be used until it has dried.
Regular cleaning ensures better shaving performance. Rinsing the shaver
head under running water after each shave is an easy and fast way to keep
it clean:
Switch the shaver on (cordless) and rinse the shaver head under hot
running water. You may use liquid soap without abrasive substances.
Rinse off all foam and let the shaver run for a few more seconds.
Next, switch off the shaver, remove the shaver Foil & Cutter cassette (1)
and let it dry.
If you regularly clean the shaver under water, then once a week apply a
drop of light machine oil onto the long hair trimmer (2) and shaver Foil &
Cutter cassette (1) (picture).
Alternatively, you may clean the shaver using a brush:
Switch off the shaver. Remove the shaver Foil & Cutter cassette and tap it
out on a flat surface.
Using a brush, clean the inner area of the shaver head. However, do not
clean the shaver Foil & Cutter cassette with a brush (picture) as this may
damage it.
Keeping your shaver in top shape
To maintain 100% shaving performance, replace the shaver Foil & Cutter
cassette (1), at least every 18 months or when worn.
Foil & Cutter cassette: 32B/32S
•
•
•
•
•
98715706_Floater330_NA_S6-24.ind9 998715706_Floater330_NA_S6-24.ind9 9 02.06.2008 16:02:04 Uhr02.06.2008 16:02:04 Uhr
To Next Page
Loading...
Need help?
General
