8
Take temperature
Press the temperature button (you can press and hold the
button or press and release it). When the device is placed
correctly, the screen displays a dashed line animation while
it takes a reading. After the animation sequence (under 2
seconds), the display shows the temperature. The appropriate
backlight color is displayed on the screen and the conrmation
beep is heard.
If the device is positioned too far away from the forehead, it will
prompt you to move closer by displaying the letters “Fwd.”
Slowly move the device toward the forehead until the dashed
line animation starts and a reading is displayed.
Read temperature
Remove the device and read the
temperature.
For no backlight and green backlight
readings, you will hear a single long
beep for 2 seconds. For yellow and red
backlight readings, you will hear 10
short beeps.
To repeat
Go to step 3.
To turn o
Press the power button to turn o. Device will also shut o
automatically after 60 seconds of no use.
Before storing the thermometer, attach the protective cap to prevent
dust and debris from accumulating on the sensor.
4
5
6
To Next Page
Loading...
Need help?
General
