To Next PageTo Next PageWhat to do if Braun Epilator is broken?
If your Braun Epilator is broken, cracked, or appears defective, do not use it, especially if the mains cord or power supply is damaged. If you have any doubts about its safety or suspect damage, refrain from using the device.
How to fix a Braun Epilator when the first LED flashes red?
If the first LED on the power bars of your Braun Epilator is flashing red, it means the removable treatment window reflector has been taken off. Replace the reflector to resolve the issue.
What to do if the Braun Silk-expert 5 BD 5006 power bars don't light up on the skin?
If the power bars on your Braun Epilator do not light up when placed on the skin, ensure the device is connected to an electrical outlet and in Ready mode. Also, make sure both skin tone sensors are making full contact with your skin. Try moving the device slightly to ensure proper skin contact for both sensors.
Why Braun Epilator doesn’t work on small areas?
The Braun Epilator may not work on small or curved areas because both skin tone sensors need to be in contact with the skin to activate the device. Reposition the device to ensure both sensors are touching the skin. If the area is too small, the sensors may not be able to get a valid skin tone reading.
Why is the first LED on my Braun Silk-expert 5 BD 5006 Epilator power bar red?
If only the first LED illuminates red on the power bar of your Braun Epilator, it indicates an invalid skin tone reading. This means your skin is either too light or too dark for the device to be safely activated.
General| Model | BD 5006 |
|---|---|
| Purpose | Hair removal |
| Skin Tone Sensor | Yes |
| Skin Tone Adaptation | Yes |
| Energy Levels | 10 |
| Number of intensity levels | 3 |
| Corded/Cordless | Corded |
| Warranty | 2 years |
| Type | IPL |
| Technology | Intense Pulsed Light (IPL) |
| Application areas | Bikini line, Face |
| Features | Skin Tone Sensor |
| Color | White and gold |
