Doc. 004970 En-Us C-2b
Information for Clinical Personnel
Modes
In order to prevent the patient from changing the settings, the Home Mode
should be activated before giving the Vivo 50 to the user. Home Mode locks
treatment settings, alarm limits and other selected information.
The Clinical Mode is used by the clinician to access all mode choices, settings
and limits.
Switching to Home Mode
Quick switching between Home Mode and Clinical Mode
1 Navigate to the “Mode” section.
2 Use the down arrow to navigate to the “Device Mode” setting. Select
“Home” using the “+” and “-” buttons.
3 Press “Yes” to change to Home Mode.
In Home Mode, the panel is locked from switching back to Clinical Mode
in order to prevent an accidental change of settings.
Press and hold the “+” and “-” buttons
simultaneously.
Release when the progress bar is filled.
Remove this page before delivering the Vivo 50 Operating manual to
the patient, in case the patient must only have access to Home
Mode.
To Next Page
Need help?
General
