Brinno ATH2000 User Manual

1
1
2
2
3
4
2
3
3
4
2
1
1
ON
3
How to Change Lens Cover Specications
Model NO. ATH2000
IP-Rating IPX5(weather resistant)
Compatible
Cameras
TLC200, TLC200Pro, TLC120, TLC130,
TLC2000
Battery Slot Room for up to 16 add’l AA batteries
Micro USB connecter (output 5V 2A)
Exchangeable
Lens Covers
Kit lens cover
Extension lens cover (for Brinno BCS
lens)
Size 6.6” x 6.1” x 4.5”
(167x156x115.5 mm)
Weight 14 oz (393 g)
In the Box
Construction power housing; Camera
mounting adapter; Battery slot;
Extension lens cover;Desiccant;
Screwdriver; USB-C Adapter; Strap*2
Green 100% - 20%
Orange 20% - 5%
Red < 5% (replace the batteries immediately)
1. Loosen screws.
2. Remove kit lens cover.
3. Mount extension lens cover.
4. Tighten screws.
Installation
3. Check battery level.
3-1. Plug the power cable into your camera.
3-2. Turn camera on.
3-3. Press battery level check button.
1. Install camera and battery slot into camera housing.
2. Tighten the screw to lock battery slot’s position in place.
3. Take out desiccant and pack it into power housing.
4. Close the power housing and lock the latch.
For TLC200, TLC200Pro (with kit lens) and TLC200Pro
(with BCS lens).
For TLC120, TLC130, TLC2000 (with kit lens) and TLC2000
(with BCS lens).
4. Battery indicator:
Regularly replace used desiccant can maintain the
long-term function of ATH2000.
5
6 7

Brinno ATH2000 Specifications

General

Brand	Brinno
Model	ATH2000
Category	Camera Accessories
Language	English