5/24/05
1
Perform all maintenance with the machine OFF
Daily Maintenance
Cleaning Oiling
Rotary hook
1. Open bobbin case covers and remove bobbin
cases. Use brush to remove lint build up in and
around rotary hooks. Compressed air may also be
used.
2. Insert bobbin cases in to rotary hooks. Make sure
bobbin thread is not over 2 inches long. Close
bobbin case covers.
Rotary hook
1. Open the bobbin case covers and rotate the outer
part of the rotary hooks counter-clockwise until you
see what is called the raceway.
(This is the raised
black portion.)
Place a small drop of oil on the
raceways.
2. Close bobbin case covers.
(Rotary hooks will automatically orientate themselves back
to the correct position when the machine is turned back on.)
For Technical Assistance Please Call Toll Free
1-877-4BROTHER
Email: tsupport@brother.com
Website: http://www.brother-usa.com/industembroidery/tech_down.aspx
B
B
E
E
S
S
-
-
9
9
4
4
0
0
,
,
9
9
4
4
1
1
,
,
1
1
2
2
4
4
0
0
,
,
1
1
2
2
4
4
1
1
9
9
6
6
0
0
,
,
9
9
6
6
1
1
,
,
9
9
6
6
2
2
,
,
9
9
6
6
3
3
,
,
1
1
2
2
6
6
0
0
,
,
1
1
2
2
6
6
1
1
,
,
1
1
2
2
6
6
2
2
,
,
1
1
2
2
6
6
3
3
To Next Page
Need help?
General
