Brother MFC-440CN User Manual

Chapter 10
84
Remote Fax commands 10
Follow the commands below to access features when you are away from the machine. When you
call the machine and enter your remote access code (3 digits followed by l), the system will give
two short beeps and you must enter a remote command.
Remote commands Operation details
91 Playing Voice messages
(MFC-665CW only)
After one long beep, the machine plays the ICM.
1 Repeat or Skip Backward Press 1 while listening to an ICM to repeat it. If you press 1
before a message, you will hear the previous message.
2 Skip Forward While playing the ICM, you can skip to the next message.
9 STOP Playing Stop Playing the ICM.
93 Erase all ICM
(MFC
-665CW only)
If you hear one long beep, the erase is accepted. If you hear
three short beeps, you cannot erase because all voice
messages have not been played, or there are no voice
message to erase.
*This code erases all recorded messages, not one at a time.
94 Play and Record OGM in Memory
(MFC
-665CW only)
1 Play 1 Msg Ctr OGM The machine plays the selected OGM. You can stop playing
OGMs by pressing 9.
2 F/T OGM
2 Record 1 Msg Ctr OGM After one long beep, you can record the selected OGM. You
will hear the message played once. You can stop recording
the message by pressing 9.
2 F/T OGM
95 Change the Fax Forwarding or Fax
Storage settings
1 OFF You can choose Off after you have retrieved or erased all
your messages.
2 Fax Forwarding One long beep means the change is accepted. If you hear
three short beeps, you cannot change because something
has not been set up (for example, a Fax Forwarding has not
been registered). You can register your Fax Forwarding
number by entering 4. (See Changing your Fax Forwarding
number on page 86.) Once you have registered the
number, Fax Forwarding will work.
4 Fax Forwarding number
6 Fax Storage
96 Retrieve a fax
2 Retrieve all faxes Enter the number of a remote fax machine to receive stored
fax messages. (See Retrieving fax messages on page 86.)
3 Erase faxes from the memory If you hear one long beep, fax messages have been erased
from the memory.
97 Check the receiving status
(MFC-440CN only)
1 Fax You can check whether your machine has received any
faxes. If yes, you will hear one long beep. If no, you will hear
three short beeps.

Brother MFC-440CN Specifications

General

Display	LCD
Built-in display	Yes
Display diagonal	2 \
Market positioning	Home & office
Print technology	Inkjet
Maximum resolution	600 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	25 ppm
Print speed (color, normal quality, A4/US Letter)	20 ppm
Digital sender	No
Number of print cartridges	4
I/O ports	1x USB 1x RJ-45
Scan speed	6 sec/page
Scan file formats	BMP, PDF, PNG, TIFF
Dimensions (WxDxH)	398 x 370 x 180 mm
Networking features	Ethernet 10/100Base-T
All-in-one functions	Fax, Scan
Color all-in-one functions	copy, fax, print, scan
Compatible operating systems	Windows 98SE/Me/2000/XP/Vista Mac OS X 10.2.4 + Linux
Scanner type	Flatbed scanner
Grayscale levels	256
Maximum scan resolution	19200 x 19200 DPI
Optical scanning resolution	600 x 2400 DPI
Maximum copy resolution	1200 x 1200 DPI
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	18 cpm
Copy speed (color, normal quality, A4)	16 cpm
Faxing	Color faxing
Fax memory	400 pages
Modem speed	14.4 Kbit/s
Fax speed dialing (max numbers)	80
Maximum print size	216 x 297 mm
Paper tray media types	Envelopes, Glossy paper, Photo paper, Plain paper, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), index card, Letter (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
Maximum ISO A-series paper size	A4
Total input capacity	100 sheets
Total output capacity	50 sheets
Auto document feeder (ADF) input capacity	10 sheets
Compatible memory cards	MMC, MS Pro, SD, xD
Standard interfaces	Ethernet, USB 2.0
Bundled software	MFL-Pro Suite ControlCentre3 ScanSoft Paperport SE ControlCentre2 NewSoft Presto! PageManager7 SYSTRAN WebTranslator 5.0
Package weight	10900 g