EasyManuals Logo
Home>Brother>All in One Printer>MFC-8520DN

Brother MFC-8520DN Service Manual

Brother MFC-8520DN
373 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
2-38
Confidential
Error code 5800
Any of error codes 6A00 to 6F00, 7600, 7800, DD00, DE00, or E200 (fuser unit error)
occurred when the power switch was turned ON or sleep mode was released.
Error code 5900
Rechecking the error after the power switch was turned OFF and then ON again because an
error was detected by the center thermistor of the fuser unit.
(This message is displayed for approximately 15 minutes when the machine is restarted after
error code 5800 has occurred.)
Error codes 5A00 to 6200
These errors do not usually occur during normal use. The possible causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
An unidentified error occurred.
Fuser Error
Turn the power off, then on again. Leave the machine for 15 min.
Self-Diagnostic
Will Automatically Restart within 15 minutes.
Step Cause Remedy
1
Connection failure of the fuser
unit harnesses
Check the connection of fuser unit harnesses,
and reconnect them if necessary.
2
Connection failure of the eject
sensor PCB harness
Check the connection of the eject sensor PCB
harness, and reconnect it if necessary.
3 Fuser unit failure Replace the fuser unit.
4
Eject sensor PCB failure Refer to "1.3.10 Check sensor operation
(function code: 32)" in Chapter 5 to check the
sensor operation. If the sensor operation is
faulty, replace the eject sensor PCB ASSY.
5
Low-voltage power supply PCB
failure
Replace the low-voltage power supply PCB
ASSY.
6 Main PCB failure Replace the main PCB ASSY.
CAUTION:
Turn OFF the power switch. After the fuser unit has cooled sufficiently, turn ON the
power switch again and leave the machine for ten minutes. This problem may then be
cleared.
---
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.

Table of Contents

Other manuals for Brother MFC-8520DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-8520DN and is the answer not in the manual?

Brother MFC-8520DN Specifications

General IconGeneral
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Economical printingYes
Duplex printing modeAuto
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)36 ppm
Duplex print speed (black, normal quality, A4/US Letter)9 ppm
PictBridgeNo
Scan speed2.68 sec/page
Dimensions (WxDxH)405 x 415 x 423 mm
All-in-one functionsCopy, Fax, Print, Scan
Color all-in-one functionsScan
Printing colorsBlack
Maximum duty cycle- pages per month
Recommended duty cycle500 - 3500 pages per month
Number of print cartridges1
Page description languagesBR-Script 3, Epson FX, IBM ProPrinter, PCL 6
Copier resize25 - 400 %
Maximum copy resolution1200 x 600 DPI
Maximum number of copies99 copies
N-in-1 copy function (N=)2, 4, 9, 16, 25
Time to first copy (black, normal)10.5 s
Copy speed (black, normal quality, A4)36 cpm
Scan toE-mail, E-mail Server, File, FTP, Image, OCR, USB
Scan driversICA, ISIS, TWAIN
Scanner typeFlatbed & ADF scanner
Grayscale levels256
Input color depth48 bit
Maximum scan areaLegal (216 x 356) mm
Output color depth24 bit
Image formats supportedBMP, JPG
Maximum scan resolution19200 x 19200 DPI
Document formats supportedPDF
FaxingMono faxing
Fax memory500 pages
Modem speed33.6 Kbit/s
Fax coding methodsJBIG, JPEG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)300
Paper input typePaper tray
Total input capacity250 sheets
Total output capacity150 sheets
Maximum input capacity850 sheets
Maximum number of input trays2
Multi-Purpose tray input capacity50 sheets
Auto document feeder (ADF) input capacity35 sheets
Custom media width76.2 - 215.9 mm
Maximum print size216 x 356 mm
Custom media length127 - 355.6 mm
Paper tray media typesBond paper, Plain paper, Pre-Printed, Recycled paper, Thin paper
Paper tray media weight60 - 105 g/m²
Non-ISO print media sizesLegal
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Multi-purpose tray media typesBond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Recycled paper
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 163 g/m²
Auto Document Feeder (ADF) media weight64 - 90 g/m²
DisplayLCD
Market positioningHome & office
Display number of lines5 lines
Display number of characters22
Standard interfacesEthernet, USB 2.0
Security algorithms802.1x RADIUS, EAP, EAP-TLS, EAP-TTLS, MD5, PEAP
Processor familyStar Sapphire
Maximum internal memory384 MB
Sound power level (standby)37 dB
Sound pressure level (printing)59 dB
Sound pressure level (quiet mode)54 dB
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)1.2 W
Power consumption (standby)8.1 W
Power consumption (PowerSave)336 W
Power consumption (average operating)651 W
Package weight20.100 g
Sustainability certificatesENERGY STAR

Related product manuals