ITCB
BREWING INSTRUCTIONS
Lay a packet of fresh tea leaves
into the funnel or loose tea
leaves into filter. Level the bed
of leaves by gently shaking.
Slide the loaded brew funnel
into the funnel rails until it
stops.
Make sure the ON/OFF switch
is ON. Press the switch of the
desired batch size. Press the
Brew Switch (A, B, or C) as-
signed to the desired product/
recipe.
Begin each brew cycle with
a clean, empty funnel and
server. Insert a BUNN
®
filter
into the funnel if using loose
tea leaves.
When tea no longer drips
from the funnel tip, carefully
remove the brew funnel and
discard the used tea leaves.
Press the ON/OFF switch to
OFF to prevent a false start.
Thoroughly clean and sanitize
the brew funnel and funnel
tip screen.
TEA BREWING
STEP 1
36846.0000D 09/08 ©2004 Bunn-O-Matic Corporation
STEP 2 STEP 3 STEP 4
Fresh tea is available at the
faucet. Drain the reservoir
before starting another brew
cycle.
STEP 5
DO NOT KEEP BREWED BEVERAGES OVERNIGHT
36846 092208
Use a clean damp cloth rinsed
in mild, non-abrasive deter-
gent to clean all surfaces.
Thoroughly rinse the entire
server.
Remove the pump tube as-
sembly.
Open the airpot by press-
ing the buttons located on
either side of the nozzle and
lifting.
STEP 1
STEP 2
STEP 3 STEP 4
CLEANING COFFEE AIRPOT
Once a month, replace the
faucet seat cup (B.O.M.
#00600.0000). Discard the
old seat cup.
The faucet assembly (B.O.M.
#03260.0001) can be ordered
for replacement.
STEP 1
STEP 2
MONTHLY CLEANING INSTRUCTIONS
To Next Page
Need help?
General
