Battery
Grip
BG-E7
!]~Instructions
Thank you
for
purchasing a Canon product.
The BG-E7 is a battery grip that can hold two Battery Packs LP-E6
or
six size-
AAI
LR6
batteries. It is al
so
equipped with a vertical-grip
shutter button, Main
Dial, etc. to enable vertical shooting with the
same ease as horizontal shooting.
• Attaching
to
the Camera
1.
Remo
ve the battery from the camera (Fig. 1).
2.
Detach the camera's battery compartment cov
er
(Fig. 2).
3. Insert the detached cover into its storage slot to ensure that it
will not
be
lost (Fig. 3).
4. Remove the protective cover, and then insert the
electrical
contacts into the battery compartment (Fig. 4-
CD
).
5.
Align the attachment screw with the camera's tripod socket,
and then turn the attach
/detach knob to tighten securely to
the
camera (Fig. 4
-<D
).
0 •
Be
sure to attach the battery grip
to
the carnera before inserting
the batteries. The results
of
the battery check ·
may
not
be
displayed proper1y if you attach the battery grip to the camera
with the batteries already inside.
• Before removing the battery grip from the camera,
be
sure
to
turn the camera's power switch to <
OFF>
, and take out the
batteries. After removing the batteries, attach the protective
cover to the electrical contacts.
• Inserting the Battery Packs
1. Slide the lever
as
shown
by
the arrow and
open
the cover
(Fig. 5).
2.
Press both release levers outward
in
the battery compartment,
and remove the battery magazine (Fig. 6).
3.
Insert
one
or two Battery Packs LP-E6 in the orientation shown
on the battery compartment cover
(F
ig. 7).
4.
Close the battery compartment cover until it clicks into place.
Ill
• If only one battery pack is used, it may
be
inserted
in
either the
right or left sides.
• If two battery pac_ks are inserted, power
iJ?
supplied
simultaneously by both battery packs. Two battery packs
with
different charging levels can
be
inserted and used without any
problems.
• Remove the battery packs from the battery grip when the
camera
will not
be
used for
an
extended
period.
• Inserting Size-AAILR6 Batteries
1.
Insert the batteries into the Battery Magazine BGM-E6 (Fig. 8).
Make sure the +
and-
battery contacts
are
properly oriented
as
shown
in the illustration.
2. Turn
over
the battery magazine
so
lhat the inserted batteries
are facing downward, and then insert the battery magazine until
the release levers
lock into place (Fig. 9).
3.
Close the battery compartment cover until it clicks into place.
0 • Fewer images can be shot when using size-ANLR6 batteries.
Also, fewer images can
be
shot depending on the battery brand
and storage conditions, and so usage of
slze-AAILR6 batteries
is
recommended only for emergencies.
• With size-AA/LR6 batteries, use six new batteries of the same
brand
at
temperatures above 20,C/68,
F.
The camera may not
function when used
in
low temperatures or when old and new
batteries are used together.
• Using a Household Power Outlet
To
connect to a household
po
w
er
outlet, use the
AC
Adapter Kit
ACK-E6
(sold separately). (Refer to ACK-E6 Instructions.)
1. Connect the DC coupler
plug to the
AC
adapter.
Connect the power cord to the
AC
adapter, and insert the
prongs into a
power
outlet.
2.
Load the DC coupler into the left side
of
the battery
compartment (Fig. 1
0-
CD
), and pass the cord through the cord
mount
(Fig. 10-®
).
0 Do not connect or disconnect the power cord
whi1e
the camera's
power switch is set to
<ON>
.
• Using the Battery Grip
• Turning the vertical-grip operation switch to <ON> (Fig. 11) makes
the battery grip buttons and dial function in the same way
as
those
on the camera.
• When shooting horizontally, turn the vertical-grip operation switch
to
<OFF> so that you
do
not accidentally use the buttons
or
dial
on the battery grip.
• Hand Strap
E-1
(sold separately) can be used for enabling a
more
secure grip.
•
The
battery level can
be
checked on the LCD panel
of
the camera
and in the viewfinder.
• Specifications
Power sources: (1) One
or
two Battery Packs LP-E6
(2)
AA
alkaline/LR6 batteries x 6
(3) AC
Adapter
Kit ACK-E6
Power
switch: Camera's
power
switch
Possible shots: Refer to
your
camera's Instruction Manual.
Working temperature range:
oo
c-
+40
°C / 32°F
-104
°F
Working humidity: 85%
or
less
Dimensions: 147.4 (W) x 114.3 (H)
x 76.9 (D)
mm/
5.8 (W) X
4.5
(H) X 3.0 (D) in.
Weight: Approx. 340 g/12.0
oz
. (not including the
power
supply
or
battery magazine)
USA
and
Canada only:
The Lithium
ion
/polymer battery
is
recyclable. Please
call 1-800-8-BATTERY
for information on how to
recycle this battery.
Le
Canada
et
les Etats-Unis seulement :
La
batterie
aux
ions
de
lithium
est
recyc
l
able
.
Pour obtenir des renseignements sur les
faf):ons
de
recy
cler
cette
batterie
,
veuillez
appeler
au
1-800-8-BATTERY.
Los
EE.UU
. y Canada solamente:
La
bateria
de
ion
de
litio
es
reciclable.
Llame
por favor
1-800-8-BATTERY para
Ia
informaciOn sobre c6mo
reciclar
esta
bateria.
To Next Page
Need help?
General
