Canon imagePRESS C800 Series Operator's Maintenance Manual

1
1
1-2
1-2
Initial Setup > Basic Operation > Operator Maintenance Mode and Replacement/Cleaning Mode
Initial Setup > Basic Operation > Operator Maintenance Mode and Replacement/Cleaning Mode
Basic Operation
Operator Maintenance Mode and Replacement/
Cleaning Mode
To use the functions provided in Operator Maintenance mode, log in (enter the password) to
move to Operator Maintenance mode.
When replacing/cleaning the parts, move to Replacement/Cleaning mode in Operator
Maintenance mode.
The gure below shows the relation between Operator Maintenance mode and Replacement/
Cleaning mode.
Replacement/
Cleaning
Mode
Operator
Maintenance
Mode
Press [Adjustment/Maintenance] >
[Operator Maintenance] >
[Operator Maintenance Mode].
Enter the password
and press [OK].
Password
Input Screen
Press [Replacement/
Cleaning].
Setting/
Registration
Screen
Press [Settings/Registration].
General Screen
General Screen
Operator
Maintenance
Basic Screen
Press [End Rplcmt./
Cleaning].
Replacement/
Cleaning Screen
in Operator
Maintenance Mode
Press [End].
Operator
Maintenance
Basic Screen
Press [Close].
Setting/
Registration
Screen
Counter
Operation
Screen
Press
[Counter Operation].
Press [Counter
Operation].
Clearing the counter
F-1-1

Canon imagePRESS C800 Series Specifications

General

Brand	Canon
Model	imagePRESS C800 Series
Category	Printer
Language	English