Canon TL User Manual

f/stop Priority Method
1
Set the preset aperture ring at the desired fj st 'O p.
2 Face the camera towards the subject, look into the
viewfinder, and press the metering lever.
3 While pressing or locking the lever, turn the shutter
speed dial.
4 Set the meter needle at the " 0" index withinthe
viewfinder for correct exposure .
•
Since the shutter speed dial cannot be set at the
intermediate positions, the shutter speed priority method
is recommended when exposure accuracy is a crucial
factor .
•
Light measurement at " B " and" X" of the shutter
speed dial is not possible with the built ·in exposure meter
because" B" is used for long exposures over one second,
and" X" is for the electronic flash unit .
• When
the built - in exposure meter is outside the coupling
range, the meter needle will point to the top of the view -
finder and will indicate that proper exposure cannot be
obtained. Refer to " Coupling Range of Built -In Exposure
Meter" on the following page.
• Do
not leave the camera on the conditions mentioned
above since the battery discharges in maximum current and
makes shorter the life . To prevent discharging be sure to
re- adjust the shutter speed dial.
19

Canon TL Specifications

General

Brand	Canon
Model	TL
Category	Digital Camera
Language	English