EVD4X, ESD4X, WMVC, WMSC: Installation Instructions
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
4
A200227B
Fig. 2 – Typical Flush-Fit Coil Installation on Furnace
(recommended)
A200228B
Fig. 3 – Adapter(s) Installation When Coil is Larger than Furnace
(recommended)
IMPORTANT: Any installation configuration shown here that is noted
as ‘not recommended’ indicates that this configuration has not been
factory tested and therefore full performance specifications have not
been certified. In instances where a ‘not recommended’ installation
configuration is required, it is the responsibility of the installer to ensure
all performance criteria is met.
A221112
Fig. 4 – Smaller Furnace, Equal Overhang, Flush Mount
(not recommended)
A221113
Fig. 5 – Smaller Furnace, Offset, Flush Mount Right or Left
(not recommended)
(YDSRUDWRU
&RLO
6XSSO\
5HWXUQ
5HWXUQ
6XSSO\
Upflow
Downflow
Airflow
Ductwork
4” minimum
Airflow
Ductwork
4” minimum
Airflow
Ductwork
Airflow
Ductwork
Flush Mount
Equal Overhang
with block-off plates
Flush Mount
Offset Left or Right
with block-off plates
Airflow
Ductwork
Airflow
Ductwork
To Next Page
Loading...
Need help?
General
