2.
CHOKE
TO
CLOSE
CHOKE:
Push
choke lever
forward.
Close choke
to
start a
cold
engine.
TO
OPEN
CHOKE:
Pull choke lever rearward. Open choke
slowly
after
engine starts.
Choke should
be
open during normal operation
or
when starting a warm engine.
3.
THROTTLE
TO
IDLE
ENG I N E: Pull th
rottle
lever rearward. Idle engine when
starting
and when
cooling
engine before stopping.
TO
INCREASE
ENGINE
SPEED:
Push
throttle
lever
forward
until
desired engine
speed
is
obtained.
Reduce engine speed
during
operation
to
obtain
maximum
fuel economy
but
not
low
enough
to
cause engine lug·
down
(or labor) which
will
result in overheating.
A.
CAUTION:
Do
not
change the engine governor settings or aver·
..
speed the engine.
4. TWO SPEED
TRANSAXLE
TO
SELECT
LOW
RANGE:
Place travel
control
lever in neutral.
Bring
tractor
to
a complete stop.
Pry lever
forward
slightly
to
clear neutral locating pin.
Pull lever up past the neutral locating pin and release.
TO
SELECT
NEUTRAL:
Place
travel
control
lever in neutral.
Bring
tractor
to
a complete stop.
Pry lever
forward
slightly
to
clear neutral locating pin.
Engage hole in lever over neutral locating pin and release.
TO
SELECT
HIGH
RANGE:
Place travel
control
lever in neutral.
Bring
tractor
to
a complete stop.
Pry lever
forward
slightly
to
clear neutral locating pin.
Push
lever
down
past the neutral locating
pin
and release .
.
13·
To Next Page
Loading...
Need help?
General
