Operation Guide 3416
E-24
Dual Time
Other: LED (light-emitting diode); Vibration alarm
Battery: One lithium battery (Type: CR2032)
Battery life: 10 years under the following conditions
One 2-second light operation per day x
One alarm operation per day x
Note: One alarm operation is 20-second audible alarm or 10-second vibration
alarm.
E-23
Specifi cations
Accuracy at normal temperature:
±
30 seconds a month
Timekeeping: Hour, minutes, seconds, pm (P), day of the week, month, day
Time format: 12-hour and 24-hour formats
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Countdown Alarm
Measuring unit: 1/10 second
Input range: 1 second to 24 hours
Stopwatch
Measuring unit: 1/100 second
Measuring capacity: 23 hours 59 minutes, 59.99 seconds
Measuring modes: Elapsed time, split time and two fi nishes
Other: Auto-Start
Alarm: Daily alarm, hourly time signal
E-22
After you set the time, press 4. A to return to the Dual Time Mode.
In the Dual Time Mode, the seconds count is synchronized with the seconds count x
of the Timekeeping Mode.
In the Dual Time Mode, press x B to toggle between the 12-hour and 24-hour
formats.
E-21
Dual Time Mode
The Dual Time Mode lets you keep track of the time in
another time zone. You can also select the timekeeping
format (12-hour or 24-hour) separately from the
Timekeeping Mode.
To set the Dual Time
Hold down 1. A while in the Dual Time Mode. The hour
digits fl ash on the display because they are selected.
Press 2. C to change the selection in the following
sequence.
Hour
Minutes
C
Press 3. D to increase the selected digits and B to
decrease them. Holding down either button changes
the selection at high speed.
Current time
Mode indicator
Minutes
Hour
E-20
To test the alarm sound
Hold down B while in the Alarm Mode to sound the alarm.
Note that pressing x B also changes the alarm and the hourly time signal ON/OFF
settings.
To Previous Page
Loading...
Need help?
General
