Casio Casiotone LK-S450 User Manual

Controlling the Sound of a Performance
EN-41
■ Adjusting the Note Sustain Time
Use the procedure below to change the sustain time when sustain is enabled.
1. Press TONE.
This displays the tone screen.
2. Long-press SUS.
This displays the sustain screen, which shows setting items for the UPPER1 part sustain time.
3. If required, press UPPER1, UPPER2, and LOWER to select the part whose setting
you want to configure.
4. Rotate the dial to change the setting.
• You can set a sustain time within the range of 0 to 9.
• After you rotate the dial once to select a value, you can change the value further using – and +.
• To return the setting to its initial default, press – and + at the same time.
• To go back to the previous screen, press BACK.
• Setting a value of “0” causes the indicator for the applicable part (“U1”, “U2”, “L”) to disappear
from the display.

Casio Casiotone LK-S450 Specifications

General

Keys	61
Polyphony	48
Rhythms	200
Display	LCD
Power Supply	AC adapter or 6 AA batteries
Dimensions	930 x 258 x 84 mm
Touch Response	3 sensitivity levels, off
Lesson Function	Yes
Metronome	Yes
MIDI	Yes
Amplifier Output	2.5W + 2.5W
Power Consumption	5.5W
Tones	600
Connectivity	USB, Audio In, Headphone Jack
Effects	Reverb, Chorus
Song Bank	160
Key Transpose	-12 to +12 semitones
Tuning Control	A4 = 415.5 – 465.9 Hz
Speakers	(13cm x 6cm) x 2
Sound Source	AHL Sound Source
Scales	17 preset scales