Reference
E-70
In certain keyboard ranges, the volume and tone
quality sound are slightly different from those in other
keyboard ranges.
This is due to system limitations. It does not indicate malfunction.
With some tones, octaves do not change at the far
ends of the keyboard.
This is due to system limitations. It does not indicate malfunction.
The pitch of the notes does not match other
accompanying instruments or sounds strange when
played long with other instruments.
• Check and adjust the transpose (page E-16) and tuning settings
(page E-16).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-10).
The reverb of notes seems to change suddenly. • Check and adjust the reverb setting (page E-15).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-10).
Operation
When I perform a skip forward or skip back
operation, the skip operation moves multiple song
measures instead of only a single measure.
While song playback is stopped or a Step Up Lesson is in progress,
skip forward and skip back operations are performed in phrase units
(page E-27).
Tone, rhythm, and other settings revert to their initial
defaults whenever you turn on the Digital Piano.
Though Digital Piano settings reset when you turn off the Digital
Piano, you can save setups to registration memory for instant recall
whenever you need them (page E-47).
Computer Connection
I can’t exchange data between the Digital Piano and
a computer.
• Check to make sure that the USB cable is connected to the Digital
Piano and computer, and that the device is selected correctly with
your computer’s music software settings (page E-64).
• Turn off the Digital Piano and then exit the music software on your
computer. Next, turn the Digital Piano back on and then restart the
music software on your computer.
Symptom Action
To Next Page
Loading...
Need help?
General
Weight and Dimensions
