English
Playing the Digital Keyboard
E-9
Use the following procedure to change the tempo of the
metronome.
1.
Press
6
.
Use w (slower) and q (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
•Pressing w and q at the same time will initialize the
tempo setting in accordance with the currently selected
song or rhythm.
•Pressing
6
causes the tempo value to flash on the
display. While the tempo value is flashing, you can use
bq
(10-key) to change it.
Note that you must input leading zeros, so 89 is input
as 089.
• The tempo value will stop flashing if you do not perform
any operation for a short while.
The metronome volume setting is changed automatically with
the volume level of the currently selected Auto
Accompaniment or song. The metronome volume cannot be
adjusted independently.
• For information about changing the Auto Accompaniment
volume, see page E-33.
• For information about changing the song volume, see page
E-19.
• You cannot adjust the balance between the metronome
and note volume during Auto Accompaniment and built-in
tune play.
Changing the Metronome Tempo
Changing the Metronome Sound Volume
Tempo value (flashes)
To Next Page
Loading...
Need help?
General
