— 3 —
USB Cradle (CA-22) Input/Output Terminals Camera connector; USB port; AC adaptor terminal (DC IN 5.3V)
Power Consumption DC 5.3V Approximately 3.4W
Dimensions 109(W) x 38.5(H) x 57(D) mm
(4.3˝(W) x 1.5˝(H) x 2.2˝(D))
(excluding projections)
Weight Approximately 61 g (2.1 oz)
Special AC Adaptor Power Requirement 100 to 240V AC, 50/60Hz, 0.12A
(Inlet Type) Output 5.3V DC, 1.0A
Dimensions 48(W) x 28(H) x 66(D) mm
(1.9"(W) x 1.1"(H) x 2.6"(D))
(excluding projections and cable)
Weight Approximately 120 g (4.2 oz)
Special AC Adaptor Power Requirement 100 to 240V AC, 50/60Hz, 0.12A
(Plug-in Type) Output 5.3V DC, 1.0A
Dimensions 47(W) x 20(H) x 72(D) mm
(1.9"(W) x 0.8"(H) x 2.8"(D))
(excluding projections and cable)
Weight Approximately 110 g (3.9 oz)
Power Supply
• Use only the special NP-20 rechargeable lithium ion battery to power this camera. Use of any other type of battery is not
supported.
• This camera does not have a separate battery for the clock. The date and time settings of the camera are cleared whenever
power is totally cut off (from both the battery and USB cradle). Be sure to reconfigure these settings after power is interrupted.
LCD Panel
• The LCD panel is a product of the latest LCD manufacturing technology that provides a pixel yield of 99.99%. This means that
less than 0.01% of the total pixels are defective (they do not turn on or always remain turned on).
Options
Mobile charger (with AC adaptor) BC-10L
Cradle (with AC adaptor) CA-22
Soft case ESC-30
ESC-31
Neck strap ENS-1
* Refer to the sales section for the details of the options.
To Next Page
Loading...
Need help?
General
