33
Snapshot Tutorial
. Specifying Movie Image Quality
Movie image quality is a standard that determines the detail, smoothness, and clarity
of a movie during playback. Shooting with the high-quality (WIDE) setting will result in
better image quality, but it also shortens the amount of time you can shoot.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the second Control Panel option from the top
(Movie Image Quality).
3. Use [4] and [6] to select the setting you want and then press [SET].
• The 16:9 aspect ratio is available only when “WIDE” is selected as the image
quality.
• Memory capacity (Movie recording time you can shoot) will be affected by the
quality settings you configure (page 138).
Image Quality (Pixels) Approximate Data Rate Frame Rate
WIDE 848
x
480 12.5 Megabits/second 30 frames/second
STD 640
x
480 10.6 Megabits/second 30 frames/second
LP 320
x
240 2.7 Megabits/second 15 frames/second
To Next Page
Loading...
Need help?
General
