EN-42
Message Description Required Action
A problem occurred while
reading file <file name>.
The file may have been moved
or deleted.
A problem occurred when you
tried opening a file from the list
of previously opened files on
the File menu.
Check to see if the file has
been moved or deleted.
There is not enough memory.
Increase memory capacity and
try again.
There is not enough memory to
perform the operation.
Increase memory capacity and
try again.
A problem occurred while
launching the emulator.
Try re-starting the application.
If you still cannot launch, it
could mean that the emulator
is damaged. Update
the emulator or reinstall it.
A problem occurred during
emulator startup.
Try restarting the application.
If this does not work, it could
mean that the emulator is
damaged. Update the emulator
or reinstall it.
A problem occurred while
launching the manual (***.pdf)
viewer.
Download the viewer from the
site below and reinstall it.
http://get.adobe.com/reader/
otherversions/
A problem occurred during
manual viewer startup.
Download and install a new
viewer from
http://get.adobe.com/reader/
otherversions/.
The following characters
cannot be used in a Key-Log
record name.
:\ /?*[ ]
The Key-Log record name you
are trying to use contains an
illegal character.
The following characters are
not allowed in Key-Log record
names.
:\ /?*[ ]
A system error has occurred.
(1) Shut down all other
applications that you are
not currently using.
(2) Check how much free
space is available on your
computer’s hard disk.
(3) Exit the emulator and
restart it.
If this does not correct the
problem, it could be the
emulator files have been
corrupted.
Please reinstall the emulator.
—
Follow the steps that are
shown on the display and try
again.
The path and/or filename
exceeds the maximum length
allowed by your Windows
operating system.
The number of letters in the
path or file name you specified
exceeds the allowable limit.
Shorten the specified path or
file name.
To Next Page
Loading...
Need help?
General
