Mode switch
Mode switch
OP
PGM
Program key Operator key
The Program key marked PGM can select any position of
the Mode switch while Operator key marked OP can select
only OFF, REG, or CAL positions.
PGM RF OFF REG X Z X2/Z2
OP key
- -
¡ ¡
- - -
PGM key
¡ ¡ ¡ ¡ ¡ ¡ ¡
1 PGM (Programming)
This position is for setting your cash register to suit the
needs of your store.
2 RF (Refund)
Use this position to correct registered items.
3 OFF
The cash register turns off in this position.
4 REG (Register)
This position is for normal transactions.
6 X (Read)
This is the position used for issuing daily sales totals
report without clearing the data.
7 Z (Reset)
This position is for issuing reports of daily totals with
clearing the accumulated totals.
8 X2/Z2
This position is used to print periodic sales reports.
Getting to know your cash
register
Daily job ow
Before opening your store
• Plugged in?
• Enough paper roll?
• Date and time are correct?
• Enough small change in the drawer?
While the store is open
• Registrations
• Issuing latest total sales report if
needed.
After closing the store
• Issuing day’s total sales report.
• Withdraw the money from the drawer.
After you withdraw all the money
from the drawer, we recommend that
you leave the drawer open when you
leave your store.
• Turn the Mode switch to OFF.
• Please see page E-20 on PCR-T2300/PCR-T2400/SE-
S900/SE-S3000.
• Please see page E-23 on SE-C3500.
MA1308-B
5. To set date, time and tax table
1. As soon as the power socket is plugged in, the
display shows the language selection screen. Choose
your language by using
?
or
>
keys then press
F
key.
2. Display changes to date and time setting screen.
Moving the input area (reversed area) by
?
or
>
keys, input date, month, year and time from ten key
pad. Input the time by 24-hour system. For example,
1356 for 1:56 pm. After then press
F
key.
3. Display then changes to tax table selection screen.
Select your state by
?
or
>
keys and press
F
key.
4. Select TABLE 1 or 2 and press
F
key.
5. Select tax rate and your area and press
F
key.
6. About help guidance
1. When you have any problem to operate or program
your cash register, press
/
key.
2. The register prints items of guidances.
3. Enter the number you need help from ten key pad and
press
/
key.
4. Follow the printed instruction.
You can also download a setting tool. Please visit
http://www.casio4business.com/sa/products/index_products.html
Preparations
Note: Please follow the steps described below.
To Previous Page
Loading...
Need help?
General
