5.
At the bottom of the display, tap to toggle it to .
6.
Press the power button to exit the MOMENT SETTER
app.
●
After performing the above operation, you need to start up the Activity
app and start a Trekking measurement operation to actually receive
notifications. See “Using the Activity App”.
Note
●
A notification from MOMENT SETTER is deleted automatically after a fixed
amount of time.
●
Since speed measurement, distance traveled measurement, and current
location detection are performed using the watch’s or your smartphone’s
GPS function, there may be some measured value error. Accuracy is
particularly poor in a ravine or canyon, among buildings, indoors, and in
other areas where signal reception is bad.
●
You can disable all MOMENT SETTER settings with a single operation.
After reading “Common Outdoor Function Settings”, perform the operation
under “All Off”.
EN-57
To Next Page
Loading...
Need help?
General
