230 Vehicle Care
4. Disconnect the electrical
connector from the bulb
assembly.
5. Press the front fog lamp bulb
assembly and remove the bulb
from the lamp housing.
6. Replace the bulb in the front
fog lamp bulb assembly.
7. Install the front fog lamp bulb
assembly to the lamp housing.
8. Connect the electrical
connector to the bulb
assembly.
9. Turn the front foglamp cover
counterclockwise to remove it
from the front wheelhouse liner.
Taillamps, Turn Signal,
Stoplamps, and Back-Up
Lamps
1. Stoplamp/Taillamp
2. Turn Signal Lamp/Taillamp
3. Back-up Lamp
To replace a taillamp, turn signal
lamp, stoplamp, or back-up bulb:
1. Open the liftgate. See
Liftgate 0 33.
2. Remove the two screws and
the lamp assembly.
3. Turn the bulb socket
counterclockwise and remove
the socket.
4. Press the bulb in and turn
counterclockwise to remove it
from the socket.
5. Press the new bulb in and turn
clockwise to install the bulb
into the socket.
6. Turn the bulb socket clockwise
to reinstall.
7. Reinstall the lamp assembly
and two screws.
To Next Page
Loading...
Need help?
General
