XENEA
Indoor packaged air-to-water heat pump
1
HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 12.692 A
60
Heating capacity: 6 to 10 kW
USE
The XENEA heat pump has been designed for heating applications in new homes.
It can be connected quickly and easily to any type of heat emitter (underfloor heating, fan coil units, radiators and mixed systems, etc.) thanks to numerous
standard components.
RANGE
The XENEA range consists of 4 single-phase and three-phase models of
6, 8 and 10 kW.
If the heat pump is the only source of heat:
Operation in heating mode up to -20°C/+45°C. A separate
source of heat must be used if outdoor temperatures drop below -20°C.
If the heat pump is used to back up a boiler:
Operates down to the balance point (temperature below which the heat
pump can no longer keep up with heating needs). Below this point, the heat
pump and boiler run either alternately (heat pump OR boiler) or at the same
time (heat pump AND boiler).
CONFORMITY
LVD 2006/95/EC
NF C15-100
EMC 2004/108/EC
PED 97/23/EC Category 1
NF EN 60-335
Radio standard EN 300-220
DEEE 2002/96/EC
RoHS 2002/95/EC
option
Plug & Heat
ready to use heat pump
Quick and easy to install
Equipped with
HomeConnect control
HFC
R410A
HEATING
30/35 - 40/45
To Next Page
Need help?
General
