Cisco 2960-C User Manual

2-9
Catalyst 3560-C and 2960-C Switch Hardware Installation Guide
OL-23803-02
Chapter 2 Switch Installation
Mounting the Switch
Figure 2-3 Installing the Mounting Screws Under a Desk or Shelf
Step 4
Use a 0.144-inch (3.7 mm) or a #27 drill bit to drill a 1/2-inch (12.7 mm) hole in the three screw
template slots.
Step 5 Insert three screws in the slots on the screw template, and tighten until they touch the top of the screw
template.
Step 6 Remove the screw template from underneath the desk or shelf.
Step 7 Place the switch upside down onto the mounting screws, and slide it forward until it locks in place. See
Figure 2-4.
Warning To prevent airflow restriction, allow clearance around the ventilation openings to be at least:
3 in. (7.6 cm) Statement 1076
1 Desk or shelf 3 Screws
2 Screw template 4 Adhesive
1
4
2
3
3
250146

Cisco 2960-C Specifications

General

Brand	Cisco
Model	2960-C
Category	Switch
Language	English