Cisco 4310 User Manual

Setup DMP Settings
1. Select Flash
2. Update Splash Screen Display Time to 10000
3. Set Max Screen Width and Height
4. Click Apply
5. Click Save Configuration and Restart DMP
720p = 1366 pixels (width) x 768 pixels (height)
1080p = 1920 pixels (width) x 1080 pixels (height)
Setup Internal Storage - Read and Write
1. Click on Internal Storage
2. Set to Read and Write
3. Click Apply
4. Click Save Configuration and Restart DMP
Adding your device into CommandCenterHD
1. Login to CommandCenterHD
2. Hover over Dashboard on the top orange bar and select Devices in the dropdown
3. Click Add Digital Signage Player
4. Create Device Name (ex. – Location of DMP "Lobby, Conference")
5. Select a Device Model (Located on bottom of DMP)
Options: 4305G, 4310G, 4400G, IP Phone
6. Select Firmware
Options: 5.4, 5.3, 5.2, 5.1, 5.0, 4.X
7. Set player status to active
8. Select a Zone
9. Enter your Device IP Address
10. Enter Zip Code of DMP Location
11. Select Time Zone of DMP Location
12. Select DMP Channel

Cisco 4310 Specifications

General

Brand	Cisco
Model	4310
Category	Media Player
Language	English