Cisco 6825 User Manual

Cisco IP Phone DECT 6825
Quick Start Guide
- Indicator light (LED)
- Emergency button
- Headset port
- Softkeys, phone control buttons
(Speaker, Menu), Navigation cluster,
call control buttons (Answer/Send,
Power/End)
- Keypad
- Volume and Mute buttons
1
2
3
4
5
6
1
2
3
4
5
6
Your Phone
1. When your handset is idle, enter the phone
number with the keypad.
2. Press Answer/Send .
Place a Call
Press Answer/Send .
Answer a Call
1. From an active call, press Hold.
2. Press Resume to pick the call back up.
Put a Call on Hold
1. From an active call, press Transfer.
2. Enter the coworker’s number and press
Answer/Send .
3. Press Transfer before or after the coworker
answers.
Transfer a Call
1. Press Recents.
2. Press right or left on the Navigation ring
to view different lists.
(All, Missed, Received, Placed)
View Your Recent Calls
Press and hold Power/End until the
screen turns on.
Turn On The Handset
Press and hold Power/End until the
screen turns off.
Turn Off The Handset
Note: When the keypad is locked, you can only dial emergency numbers.
Press and hold Asterisk until the
message “Press and hold *” is displayed
on the screen.
Lock the Handset Keypad
Press and hold Asterisk until the
message “Press and hold *” doesn’t
display on the screen.
Unlock the Handset Keypad

Cisco 6825 Specifications

General

Device lock	Yes
Handset type	Wired handset
Product type	IP Phone
Case material	Polycarbonate
Mounting type	Desk/Wall
Product color	Black
Type	DECT telephone
Display diagonal	2 \
Display resolution	240 x 320 pixels
Phonebook capacity	- entries
Number of VoIP accounts	-
Keypad number of keys	28
Standby time	200 h
AC adapter output voltage	5 V
Certification	CE
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	20 mm
Width	46 mm
Height	117 mm
Weight	86 g

Summary

Handset Operations

Turn Handset On and Off

Instructions for powering the handset on and off using the Power/End button.

Lock and Unlock Handset Keypad

Guides on locking and unlocking the keypad using the Asterisk button.

Call Management

Placing and Answering Calls

Steps to place a call by dialing and answer an incoming call.

Hold and Resume Calls

Procedure for putting a call on hold and resuming it.

Transferring Calls

How to transfer an active call to another coworker.

View Recent Calls

How to access and navigate through the list of recent calls.

Audio and Call Settings

Mute and Adjust Volume

How to mute audio during a call and adjust call volume.

Ringtone Volume and Melody

Adjusting ringtone volume and selecting a ringtone melody.

Set Do Not Disturb

Configuring the 'Do Not Disturb' feature for incoming calls.

Coverage Warning Tone

Enabling or disabling the coverage warning tone.

Voice Mail and Call Forwarding

Listen to Voice Messages

Instructions for accessing and listening to voice messages.

Voicemail Menu Options

Navigating voicemail options like PIN, greetings, and call forwarding.

Call Forwarding Options

Setting up unconditional or screened call forwarding.