EasyManuals Logo
Home>Cisco>Network Router>ASR 1000

Cisco ASR 1000 User Manual

Cisco ASR 1000
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Cisco ASR 1000-SIP40This SIP supports:
4 half height Rate or full rate or combination) SPAs with up to 24 ports per SPA
2 full height Rate or full rate or combination) SPAs with up to 48 ports per SPA
2 half height and 1 full height combination that does not exceed 96 ports
Up to 40 Gbps aggregate bandwidth from the four SPA bays
ESI bandwidth of 11 to 46 Gbps
Ingress buffering at 128 MB and egress buffering at 6MB
For information about what hardware is supported and compatible and not compatible with the new ASR
1000 40G components and Cisco ASR 1013 Router, see Table 2-4 and Table 2-3 .
The Cisco SPAs provide the physical interfaces for router connectivity ranging from copper, channelized,
POS, ATM and Ethernet. The Cisco ASR 1000 Series SIP provides the physical termination for the SPAs
and accepts up to four half-height and 2 full height Cisco SPAs.
The is a list of characteristics of the Cisco ASR 1000 Series SPA Interface Processors for the Cisco ASR
1006, Cisco ASR 1004, and Cisco ASR 1013 routers:
A SIP is a carrier card that inserts into a router slot like a line card. It provides no network connectivity
on its own.
A SIP contains one or more subslots, which are used to house one or more SPAs. The SPA provides
interface ports for network connectivity.
During normal operation, the SIP should reside in the router fully populated either with functional SPAs
in all subslots, or with a blank filler plate (SPA-BLANK=) inserted in all empty subslots.
SIPs support online insertion and removal (OIR) with SPAs inserted in their subslots. SPAs also support
OIR and can be inserted or removed independently from the SIP.
Fully populate all slots and subslots with blank filler plates or functional SPAs for maximum efficiency
of the cooling system.
Note
This section describes the Cisco ASR 1000 Series SPA Interface (SIP) components and subslot
identification.Figure 4-1 shows an example of the Cisco ASR 1000 Series SPA Interface (SIP) module.
STATUS Led4SPA subslot 01
PWR Led5SPA subslot 12
Cisco ASR 1000 Series Router Hardware Installation Guide
2
Cisco ASR 1000 Series Router SPA Interface Processors (SIPs)
Cisco ASR 1000 Series SPA Interface Processor

Other manuals for Cisco ASR 1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 1000 and is the answer not in the manual?

Cisco ASR 1000 Specifications

General IconGeneral
BrandCisco
ModelASR 1000
CategoryNetwork Router
LanguageEnglish

Related product manuals