Installing the Cisco ASR 903 Router as a Satellite
Shelf
The chapter describes how to install the Cisco ASR 903 Router as a satellite shelf, and how to connect it to
networks and external devices.
•
Safety Guidelines, page 1
•
Site Planning, page 9
•
Receiving the Cisco ASR 903 Router, page 19
•
Installing the Router in a Rack, page 23
•
Installing the Chassis Ground Connection, page 28
•
Installing the Chassis Ground, page 30
•
Installing the Fan Tray, page 31
•
Installing and Removing an RSP Module, page 34
•
Installing and Removing an Interface Module, page 37
•
Installing the Power Supply, page 39
•
Connecting the Cisco ASR 903 Router to the Network, page 52
Safety Guidelines
Before you begin the installation of the Cisco ASR 903 Router as a satellite shelf, review the safety guidelines
in this chapter to avoid injuring yourself or damaging the equipment.
In addition, before replacing, configuring, or maintaining the Cisco ASR 903 Router as a satellite shelf, review
the safety warnings listed in Regulatory Compliance and Safety Information for the Cisco ASR 903 Router
.
Cisco ASR 9000 Series Aggregation Services Router Satellite Systems Installation Guide
1
To Next Page
Need help?
General
