Cisco ATA 191 Manual

Your ATA
• Your New ATA, on page 1
• Devices Associated with Your ATA, on page 1
• Cisco ATA 191 and ATA 192 Hardware, on page 2
• Install Your New ATA, on page 6
• Phone Adapter Configuration Utility, on page 7
• Supported ATA Call Features, on page 8
Your New ATA
Your analog telephone adapter (ATA) allows you to connect an analog device, such as an analog phone or
fax machine, to your network. The connected device can then function like the IP phones in your network.
Your new analog telephone adapter (ATA) has two interfaces:
• Two RJ11 ports for analog devices
• A RJ45 port for Ethernet
Light-emitting diodes (LEDs) on the ATA provide status.
Install your ATA with the components that are included in the box.
You'll perform these tasks:
• Install your ATA with the components in the box.
Devices Associated with Your ATA
Use your ATA to connect these types of devices to your network:
• Analog phones
• Analog phones have no softkeys.
• The information that analog phones display depends on the model you have.
• You use the phone’s flash button for hold, resume, transfer, and conference.
Your ATA
1

Cisco ATA 191 Specifications

General

Brand	Cisco
Model	ATA 191
Category	Adapter
Language	English