Corporate Headquarters:
Copyright © 2004–2005 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco CWDM Passive Optical System
Installation Note
This document provides installation instructions for the Cisco Coarse Wave Division Multiplexer
(CWDM) passive optical system. The CWDM passive optical system product numbers are listed in
Table 1.
Table 1 CWDM Passive Optical System Product Numbers
Product Number Description
CWDM-CHASSIS-2= 2-slot chassis, 1 RU
CWDM-MUX8A= 8-channel MUX/DEMUX module
CWDM-OADM4-1= 4-channel OADM module (1470, 1490, 1510, and
1530 nm)
CWDM-OADM4-2= 4-channel OADM module (1550, 1570, 1590, and
1610 nm)
CWDM-OADM1-1470= Dual single-channel OADM module, 1470 nm
CWDM-OADM1-1490= Dual single-channel OADM module, 1490 nm
CWDM-OADM1-1510= Dual single-channel OADM module, 1510 nm
CWDM-OADM1-1530= Dual single-channel OADM module, 1530 nm
CWDM-OADM1-1550= Dual single-channel OADM module, 1550 nm
CWDM-OADM1-1570= Dual single-channel OADM module, 1570 nm
CWDM-OADM1-1590= Dual single-channel OADM module, 1590 nm
CWDM-OADM1-1610= Dual single-channel OADM module, 1610 nm
WDM-1300-1550-S= 1300 nm/1550 nm splitter cable
CAB-SM-LCSC-1M= LC to SC connector cable, 1 m
CAB-SM-LCSC-5M= LC to SC connector cable, 5 m
To Next Page
Need help?
General
